Hello This file does not work! The first part of it is empty. I opened with an HEX editor. Two files are needed to fix the BIOS. One is W25X10(UEC2 128KB) and W25Q128 (UH3 approximately 16MB). Here is the uploaded only file: bios-fix.com_Lenovo V530-22ICB ,V530-24ICB All-in-One (Lenovo) M20KT33A, 16MB bios bin file Please upload both files (correct) or return my money !
W25X10 UEC2 no have data you need only to program 16mb bios file What is the pc problem? Also please upload your bios backup
Hello, The computer worked very well, but died after the BIOS update W25X10 UEC2 - It is important for starting the system ! Read below and you will understand why 1. Pls download official update m20jy48usa.exe from https://support.lenovo.com/ 2. Extract to C:\SWTOOLS\FLASH\M20JY48USA in folder M20JY48USA - there are two many files. 3. see the files: M20CT48A.ROM (128KB - this is W25X10) and IMAGEM20.rom (this is flash W25Q128) I paid the amount you requested and downloaded the file ....Lenovo V530-22ICB ,V530-24ICB All-in-One (Lenovo) M20KT33A, 16MB bios bin file 1. I programmed it in memory W25Q128.... there was no effect. 2. then I reprogrammed W25X10 whit M20CT48A.ROM (from folder M20JY48USA, file M20CT48A.ROM) + your file (for which I paid). The computer still cannot start. He is dead. 3.then I reprogrammed W25X10 whit M20CT48A.ROM (from folder M20JY48USA, file M20CT48A.ROM) + my old damaged W25Q128. Already the bios starts, but after about 1 min (restarts 4 times and the screen lights up in the bios). All this proves that memory W25X10 is important for start system ! I'm attaching mine dump. Take a look at my file W25X10 whit Hex editor. It is half empty. Did you understand why I'm looking for both files. This one of yours doesn't work. This upload fail (Lenovo V530-22ICB ,V530-24ICB....) is empty to address 45700h. Mine is not, check! But with it, the computer turns on, albeit more slowly, by restarting the BIOS 4 times. Then the operating system works properly.
Hi, My Lenovo V530 24ICB AIO 10UW done an update from MS last week for the BIOS and now makes a melody on startup of 3 short and one longer beep. I have tried dissembled the AIO and removed the BIOS battery but no joy in clearing it. Does anyone know what the correct way is too do this and is there a jumper I can use to clear the BIOS as it has a black screen now etc. I tried removing the RAM but no joy as still beeping and no screen output. Thanks for any help.